Quarry Extraction and Material Characteristics
Granite in Pakistan is one of Pakistan's most sought-after natural building materials, extracted from established concessions across Mansehra, Baltistan, and Nagarparkar Concessions. Selected boulders and raw quarry blocks are transported to modern gangsaw mills equipped with multi-blade diamond cutting frames and bridge saws to ensure ±1mm thickness calibration.
Unlike manufactured artificial tiles with printed glaze layers, natural Granite in Pakistan is a solid geological material. When installed in high-traffic residential villas or commercial developments, it provides superior compressive durability, lifetime regrinding potential, and authentic architectural distinction.
ASTM Physical and Mechanical Test Specifications
Independent laboratory testing verifies the structural suitability of Granite in Pakistan for residential flooring, heavy-duty stair treads, and exterior architectural cladding:
| ASTM Engineering Property | Test Method | Verified Laboratory Value |
|---|---|---|
| Bulk Density | ASTM C97 | 2.85 g/cm³ |
| Compressive Strength | ASTM C170 | 14,200 - 18,500 PSI |
| Water Absorption by Weight | ASTM C97 | 0.14% - 0.28% (Low Porosity) |
| Flexural Modulus of Rupture | ASTM C99 | 1,850 - 2,400 PSI |
| Mohs Surface Hardness | Mineral Scratch Scale | Mohs 6.5 - 7.0 |
Verified 2026 Granite in Pakistan Price Index in Pakistan
Wholesale factory-gate supply rates across major metropolitan processing yards in Pakistan:
| Cut Format and Grade | Dimensions | Thickness | Wholesale Rate (PKR / sq.ft) |
|---|---|---|---|
| Standard Commercial Tiles | 12" × 24" (1x2 ft) | 16mm - 18mm | PKR 350 - 550 |
| Large-Format Calibrated Tiles | 24" × 24" (2x2 ft) | 18mm - 20mm | PKR 550 - 720 |
| Full Gangsaw Slabs (Selected Lot) | Custom Length × Width | 20mm - 30mm | PKR 730 - 750 |
| Single-Piece Stair Treads | 12" × 48" / 12" × 60" | 25mm (Bullnosed) | PKR 788 / step |
City-Wise Freight and Transit Note:
Rates quoted above reflect factory dispatch gates in Karachi and Balochistan. Direct truckloads to Lahore, Rawalpindi, and Islamabad incur nominal transit freight of PKR 15 to PKR 25 per square foot depending on fuel surcharges. Use our turnkey stone calculator to generate an all-inclusive cost estimate.
Recommended Architectural Applications
Residential Flooring
Installed in large living rooms and hallways. Pair with complementary stones like Tavera Beige or contrasting Ziarat White to produce harmonious floor plans.
Staircase Steps and Risers
Single-piece calibrated gangsaw steps with half-bullnose or full-bullnose edge profiling provide long-term pedestrian safety and easy mopping. Check our Stairs Design Guide.
Wall Cladding and Feature Panels
Book-matched slab panels adorn reception feature walls, TV consoles, and bathroom vanity backsplashes. Secure dry-cladding brackets prevent mechanical detachment.
Frequently Asked Questions About Granite in Pakistan
In 2026, natural granite slabs in Pakistan range between PKR 350 to PKR 480 per square foot for indigenous grey and pink varieties, and PKR 520 to PKR 750 per square foot for dense black granites and imported calibrated countertop slabs.
Granite is an igneous rock formed under extreme subterranean heat, granting it a Mohs hardness of 6 to 7. It resists knife scratches, hot boiling pots, lemon juice, and oil stains far better than calcium carbonate marbles.
Yes. With high compressive strength exceeding 20,000 PSI and low water absorption (<0.2%), flamed or honed Pakistani granite steps withstand torrential monsoon rains and heavy pedestrian traffic without slipping or weathering.