Onyx marble in Pakistan costs PKR 500 to PKR 950 per sq.ft for 18–20mm calibrated slabs, material only, ex-factory Karachi, at rates checked on 12 November 2026. Light Green starts at PKR 550 per sq.ft, Honey at PKR 650, and White tops the range at PKR 700 to PKR 950. Cut-to-size panels, backlit-grade selection, fitting, and LED backlighting cost extra.

The table below gives the slab, cut-to-size, and export rates from the live Onyx marble variety page, checked 12 November 2026. Prices are material only, per square foot, ex-factory Karachi, for 18–20mm calibrated slabs. Backlit-grade selection (consistent translucency) adds 10–15%. Natural stone varies by slab, so treat each range as a market range for that colour, not a fixed price for every slab.
| Onyx Colour | Slabs (18–20mm) | Cut-to-Size | Export FOB (USD/sqm) |
|---|---|---|---|
| Light Green | PKR 550 - 750/sq.ft | PKR 750 - 950/sq.ft | USD 10 - 17 |
| Multi-Green | PKR 600 - 800/sq.ft | PKR 800 - 1,000/sq.ft | USD 12 - 18 |
| Honey / Orange | PKR 650 - 900/sq.ft | PKR 900 - 1,150/sq.ft | USD 14 - 20 |
| Dark Green | PKR 550 - 750/sq.ft | PKR 750 - 950/sq.ft | USD 11 - 17 |
| Brown | PKR 500 - 700/sq.ft | PKR 700 - 900/sq.ft | USD 10 - 15 |
| White | PKR 700 - 950/sq.ft | PKR 950 - 1,250/sq.ft | USD 15 - 22 |
| Black | PKR 600 - 850/sq.ft | PKR 850 - 1,100/sq.ft | USD 12 - 18 |
Source basis: Onyx variety page, “Rates updated October 2026”, factory-gate slab rates, 18–20mm calibrated. Backlit-grade selection and book-matched pairs are priced per project.
Read the rates carefully — three things do not line up at first glance. First, the variety page’s own summary says PKR 450–950 and that “Light Green and Brown onyx start around PKR 450–550”, but its colour table starts at PKR 500 (Brown) and Light Green at PKR 550. This guide uses the colour table, the detailed check. Second, onyx has no row in the live Pakistan marble price list (rates live 30 September 2026) — the variety page is the only live source for onyx rates. Third, the Karachi city page lists “Pakistan Green Onyx (Export Grade)” at PKR 850–2,100 per sq.ft — a different scope (export-grade selection, 16mm/20mm slabs), not a domestic slab rate. It is shown separately below, not mixed into the table above.
Karachi is the factory gate, next to the Manghopir processing mills; Lahore and Rawalpindi add freight on top of factory-gate rates. The live price list puts inter-provincial freight at about PKR 10 to PKR 20 per sq.ft for Lahore and Rawalpindi, and the city figures below are the Karachi rate plus that freight band, marked as estimates. No city figure is published for Peshawar, Multan, or other cities, so get those quoted in writing.
| City | Light Green Slabs (18–20mm) |
|---|---|
| Karachi (factory gate) | PKR 550 - 750/sq.ft |
| Lahore | PKR 560 - 770/sq.ft (est.) |
| Islamabad / Rawalpindi | PKR 560 - 770/sq.ft (est.) |
Other colours add the same PKR 10 to PKR 20 freight band to their Karachi rates. For export buyers, Light Green onyx runs USD 10–17 per sqm FOB Karachi for 20mm calibrated slabs, with a minimum order of one 20ft container (about 450 sqm) and a lead time of 15–20 days after order confirmation. Payment is T/T (30% advance, 70% before shipment) or irrevocable L/C at sight, packed in ISPM-15 fumigated wooden crates (variety page, October 2026).
Colour and rarity come first: White and Honey are the scarcest colours on the live list, at PKR 700–950 and PKR 650–900 per sq.ft, while Brown is the most available at PKR 500–700. Translucency comes second: backlit-grade selection, where the slab glows evenly under light, adds 10–15% to the slab rate. Format comes third: cut-to-size panels cost more than raw slabs — Light Green rises from PKR 550–750 as slabs to PKR 750–950 cut to size — and book-matched pairs are priced per project. Thickness comes fourth: 18–20mm is the standard for walls, because 30mm diffuses too much light for backlighting. Transport is the extra factor for buyers outside Karachi: Lahore and Rawalpindi add roughly PKR 10 to PKR 20 per sq.ft in freight.
Onyx is a statement stone, used for the few square metres meant to stand out — not for full-house flooring. The table below follows the live variety page’s application guidance.
| Application | Colours Used | Format |
|---|---|---|
| Backlit feature walls | Honey, Light Green, White | 18–20mm slabs + LED panels |
| Bar & reception counters | Honey, Black, Multi-Green | Cut-to-size, edge profiled |
| Vanity tops & washbasins | Brown, White, Light Green | Cut-to-size, sealed |
| Fireplace surrounds | Brown, Honey | Slabs / cut-to-size |
| Table tops & furniture | Any colour | Custom cut-to-size |
| Floor medallions & borders | Multi-Green, Black | Waterjet-cut inlay strips |
LED panels, the aluminium frame, and the ventilated cavity behind a backlit wall are priced per project — no published rate exists for that hardware, so get it quoted with the slab. The variety page recommends even-diffused LED panels at 4000–5000K, an aluminium frame with a 50–80mm cavity, and sealing before backlighting, since moisture behind panels causes staining.
A material-only rate is only part of a feature-wall budget. The live price list breaks the finished cost into four parts: raw stone material, cement and bonding sand at PKR 25 to PKR 35 per sq.ft, stonemason fitting labour at PKR 40 to PKR 50 per sq.ft for a straight layout (PKR 55 to PKR 70 for diagonal patterns), and machine diamond grinding and chemical polish at PKR 30 to PKR 40 per sq.ft. Together, fitting and polishing add roughly PKR 95 to PKR 155 per sq.ft to a material-only quote. On that basis, a Light Green cut-to-size feature wall finishes at roughly PKR 845 to PKR 1,105 per sq.ft, before transport, wastage, sealing, and backlighting hardware. For a 100 sq.ft feature wall, that is a PKR 75,000 to PKR 95,000 material bill for Light Green cut-to-size panels and a roughly PKR 84,500 to PKR 110,500 finished wall. Always get the finished figure in writing: a material-only quote that looks cheap can still end expensive once fitting, polish, sealing, and lighting are added.
Buyers often ask how onyx differs from ordinary marble. Quick verdict: onyx is the stone for glowing feature walls and counters; marble is the stone for full floors and stairs. The comparison below follows the live variety page, with price ranges from the live price sources named.
| Feature | Onyx | Marble |
|---|---|---|
| Composition | Banded chalcedony (quartz) | Metamorphosed limestone (calcite) |
| Translucency | Yes — glows when backlit | No (opaque) |
| Hardness | Mohs ~3 (softer) | Mohs 3–4 |
| Price (PKR/sq ft) | 500 – 950 (slabs, colour table) | 125 – 680 (live price index) |
| Best use | Feature walls, backlit panels, counters | Full flooring, stairs |
| Rarity | Very rare (about 7 producing countries) | Common worldwide |
Check translucency first: hold a light behind an 18mm slab and look for an even glow — veins should illuminate and bands should deepen, without dark dead patches. Check banding consistency across several slabs from the same lot, not just the display piece, since every onyx block is geologically unique. Look for cracks, vein breaks, and dull patches, and check thickness with a straight edge: calibrated slabs should sit flat without rocking. Ask the seller, in writing, for the colour, grade, size, thickness, and finish, and for whether the quoted rate is material-only or fitted. Ask for actual slab photos before ordering — the variety page advises this for every onyx order — and confirm the veining pattern across the lot, since book-matched pairs are priced per project. Finally, compare the same colour and format across sellers: a slab rate compared with a cut-to-size rate is not a comparison at all.
Onyx is softer and more porous than granite, at Mohs ~3, so it scratches and etches more easily: lemon, vinegar, and other acids dull the polish, and no honest seller can promise an onyx counter that never stains. Seal onyx annually with a penetrating stone impregnator, clean only with pH-neutral stone soap — never acids, bleach, or abrasive pads — wipe spills immediately, and use coasters under glasses. Backlit panels need dusting behind the slab yearly, and the LED fitting needs an access panel. Sealed properly, onyx keeps its glow for decades, but it is a statement stone for feature areas: for full-house flooring, use marble instead — see the marble tiles price guide for full-floor rates.
Related reading: Onyx marble colours and export rates, the live Pakistan marble price list, marble prices in Karachi, marble prices in Lahore, marble polishing rates and process, black marble price in Pakistan, and white marble price in Pakistan.
Answers to guide your budgeting and material selection: