Sunny Grey marble in Pakistan costs PKR 55 to PKR 85 per sq.ft by grade, material only, ex-factory Karachi, at rates checked on 15 November 2026. Commercial grade is PKR 55 to PKR 65, Standard grade is PKR 65 to PKR 75, and Select grade is PKR 75 to PKR 85. Stair treads run PKR 150 to PKR 165 per step and 30mm kitchen countertop slabs run PKR 210 to PKR 225 per sq.ft. City rates, the wholesale price index, and finished fitted costs are all listed below, with the scope of each figure stated.

Figure 1: Calibrated gangsaw slab of Grade A Sunny Grey marble, showing the even grey tone and high-gloss polish retention listed on the live variety page.
The table below gives the grade-wise flooring rates from the live Sunny Grey marble variety page, checked 15 November 2026. The page states “Quarry-direct pricing, updated October 2026” and that prices are per square foot, ex-factory Karachi. Final price depends on slab selection — no two slabs are identical — so treat each range as a market range for that grade, not a fixed price for every slab.
| Grade | Description | PKR / sq ft | Suits |
|---|---|---|---|
| A — Select | Consistent soft grey, minimal tone shift, clean edges | PKR 75 - 85 | Drawing rooms, villas, showrooms |
| B — Standard | Soft grey with slight tone variation, minor natural marks | PKR 65 - 75 | Bedrooms, hallways, apartments |
| C — Commercial | Natural variation, visible character, rustic charm | PKR 55 - 65 | Budget projects, rentals, basements |
Source basis: Sunny Grey variety page, “Quarry-direct pricing, updated October 2026”, per square foot, ex-factory Karachi, standard flooring grades. Sizes run 12"x12", 12"x24" and 24"x24" tiles, with gangsaw slabs up to 8ft x 5ft; thickness is 15–18mm for tiles, 20mm for slabs and 30mm for stairs; finishes are Polished, Honed and Brushed.
Read the rates carefully — the same stone shows different figures on different live Tavera pages, because the scope is different. The variety page’s quarry-direct ex-factory rates above (PKR 55–85) are the lowest figures on the site. The live Pakistan marble price list (rates live 30 September 2026) lists Sunny Grey higher — 12"x12" tiles at PKR 125–145, calibrated 12"x24" (18mm) at PKR 150–180, gangsaw slabs at PKR 185–230 and staircase steps at PKR 280–350 per running foot — as a wholesale index, with sourcing listed as Buner and KP quarries. The homepage market-rates ticker lists “Sunny Grey Commercial” at PKR 130–170 and “Sunny Grey Calibrated” at PKR 175–235. None of these figures is wrong on its own; they cover different points in the supply chain (quarry-direct factory gate, wholesale index, market ticker). This guide leads with the variety page’s grade table because it is the most recent (October 2026) and the most specific to Sunny Grey, and shows the other live figures separately below instead of blending them into one range.
Karachi is the factory gate, next to the Manghopir processing mills; other cities add freight on top of factory-gate rates. The table below is the variety page’s city-wise table for Grade B, 24"x24" tiles, checked 15 November 2026.
| City | Grade B, 24"x24" (PKR / sq ft) |
|---|---|
| Karachi (factory gate) | PKR 65 - 85 |
| Lahore | PKR 75 - 95 |
| Islamabad / Rawalpindi | PKR 80 - 100 |
| Peshawar / Multan | PKR 70 - 90 |
The live city pages show higher figures for a different format and scope, so they are listed here separately and not mixed into the table above. The Lahore city page lists Sunny Grey at PKR 105–145 per sq.ft for 12"x24" (16mm) tiles, and its FAQ puts entry-level marble in Lahore like Badal and Sunny Grey at PKR 95–140 per sq.ft. The Rawalpindi and Islamabad page lists Sunny Grey (Local Northern) at PKR 100–135 per sq.ft for 12"x24" (16mm), and its FAQ puts Sunny Grey and Badal at PKR 100–140 per sq.ft in the twin cities. The Karachi city page FAQ puts factory-gate prices for regional stones like Badal and Sunny Grey at PKR 90–130 per sq.ft. The live price list puts inter-provincial freight at about PKR 10 to PKR 20 per sq.ft for Lahore and Rawalpindi, which explains part of the gap between the Karachi factory-gate table and the city tables. Get the rate for your city, grade, size and thickness in writing before ordering.
For export buyers, the variety page lists Sunny Grey FOB Karachi price as on request — share quantity and destination port for today’s export rate. Minimum order is one 20ft container (about 450 sqm / 4,800 sq ft), lead time is 15–20 working days after order confirmation, packaging is ISPM-15 fumigated wooden crates with A-frame loading and a moisture barrier, payment is T/T (30% advance, 70% before shipment) or irrevocable L/C at sight, and 300x300mm cut samples ship worldwide in 7 days (courier charges apply). The stone is traded internationally as “Balochistan Grey” / “Pakistan Grey”.
Grade comes first: Select grade (PKR 75–85) costs more than Standard (PKR 65–75) and Commercial (PKR 55–65) because it has a consistent soft grey tone, minimal tone shift and clean edges, while Commercial grade carries natural variation. Slab variation comes second: Sunny Grey is quarried from the Sunny Grey belt of Balochistan, also traded as “Pakistan Grey” or “Balochistan Grey”, and no two slabs are identical — even tone across a lot costs more than mixed tone. Format comes third: 30mm stair treads run PKR 150–165 per step and 30mm fabricated kitchen slabs run PKR 210–225 per sq.ft, roughly 2.5x and 3–4x the flooring rate, because of thickness and edge fabrication. Finish comes fourth: mirror polish, honed and brushed finishes differ in labour, and gangsaw slabs cost more than calibrated tiles. Transport is the extra factor for buyers outside Karachi: Lahore and Rawalpindi add roughly PKR 10 to PKR 20 per sq.ft in freight, and delivery is charged at actual cost.
Sunny Grey is a workhorse grey marble for Pakistani homes — a cool grey base with soft cloudy veining that stays calm and forgiving where white marble demands constant upkeep. The table below follows the live variety page’s application guidance, with rates checked 15 November 2026.
| Application | Format | Rate |
|---|---|---|
| Flooring | 24"x24" calibrated tiles, 15–18mm | PKR 65 - 85 / sq.ft |
| Stairs | 30mm treads, bullnose edge, mirror polish | PKR 150 - 165 / step |
| Bathroom | Sealed tiles, honed finish for slip resistance | PKR 65 - 85 / sq.ft (material) |
| Kitchen countertops | 30mm slab, fabricated, sealed | PKR 210 - 225 / sq.ft |
| Wall cladding | Lightweight 15mm panels | Priced per project |
| Rental & commercial | Grade C tiles | PKR 55 - 65 / sq.ft |
Flooring is the signature use: 24"x24" calibrated tiles give bedrooms, lounges and apartments a modern grey look at a modest price. For stairs, pair the grey treads with white risers for contrast — see the staircase steps and risers guide. In bathrooms the neutral grey hides water spots better than white marble, but seal it and use a honed finish for slip resistance. In kitchens, apply an oleophobic nano-sealer against turmeric, lemon and vinegar, and always use cutting boards and trivets — see the kitchen marble guide. Wall cladding uses lightweight 15mm panels; the variety page publishes no per-sq.ft rate for cladding panels, so get that quoted per project.
A material-only rate is only part of a flooring budget. The live price list breaks the finished cost into four parts: raw stone material, white cement and bonding sand at PKR 25 to PKR 35 per sq.ft, stonemason fitting labour at PKR 40 to PKR 50 per sq.ft for a straight layout (PKR 55 to PKR 70 for diagonal patterns), and machine diamond grinding and chemical polish at PKR 30 to PKR 40 per sq.ft. Together, fitting and polishing add roughly PKR 95 to PKR 155 per sq.ft to a material-only quote. On that basis, a Standard grade (Grade B) Sunny Grey floor at PKR 65 to PKR 75 per sq.ft material finishes at roughly PKR 160 to PKR 200 per sq.ft for a straight layout, before transport, wastage and sealing. For a 100 sq.ft room, that is a PKR 6,500 to PKR 7,500 material bill and a roughly PKR 16,000 to PKR 20,000 finished floor. The price list’s own finished total is higher — approximately PKR 220 to PKR 275 per sq.ft for Sunny Grey / Badal — because it is worked from its higher wholesale material band (PKR 125 to PKR 350 per sq.ft). Both totals are shown here with their basis, so a buyer can see which material rate the finished figure is built on. Always use pure white cement for light stones to prevent yellowing, and get the finished figure in writing: a material-only quote that looks cheap can still end expensive once fitting, polish and sealing are added.
Buyers most often compare these three Balochistan stones. Quick verdict: choose Sunny Grey for affordable modern grey interiors, Sunny White for classic white flooring, Ziarat White for maximum prestige. The comparison below follows the live variety page, with price ranges from the live price sources named.
| Feature | Sunny Grey | Sunny White | Ziarat White |
|---|---|---|---|
| Price (PKR/sq ft) | 65 - 85 | 105 - 120 | 180 - 650 |
| Base color | Soft grey | Warm white | Snow white |
| Veining | Light grey clouds | Minimal, faint | Soft silver, wispy |
| Suits | Modern grey interiors | Budget white flooring | Luxury flooring, mosques |
| Origin | Balochistan | Balochistan | Ziarat, Balochistan |
| Stain resistance | Higher (hides marks) | Moderate (seal it) | Moderate (seal it) |
Badal is the other budget grey in the same family: the variety page puts Badal at PKR 70–90 per sq.ft, with a cloudier, more patterned look than Sunny Grey’s even grey tone. Many homeowners mix them — white field tiles with grey borders. For full white-marble rates, see the white marble price in Pakistan guide.
Check colour consistency first: look at several slabs from the same lot, not just the display piece, since every slab is unique and tone shifts between slabs. Look for pinholes, vein breaks and dull patches, and check thickness with a straight edge: calibrated tiles should sit flat without rocking. Ask the seller, in writing, for the grade, size, thickness and finish, and for whether the quoted rate is material-only or fitted — a slab rate compared with a fitted rate is not a comparison at all. Ask for actual slab photos before ordering, and confirm the veining pattern across the lot, since book-matched pairs are priced per project. For kitchens, ask whether the sealer is included in the quote; for stairs, confirm the tread thickness (30mm) and the edge profile (bullnose) in writing. Finally, compare the same grade and format across sellers, and confirm the city rate — Karachi factory-gate, Lahore and Islamabad/Rawalpindi rates differ by PKR 10 to PKR 20 per sq.ft in freight alone.
Sunny Grey is a calcite marble, so it is sensitive to acids: lemon, vinegar and turmeric can etch or stain the polish, and no honest seller can promise a marble floor that never stains. Apply a penetrating sealer before grouting, and an oleophobic nano-sealer in kitchens; wipe turmeric, tea and citrus spills promptly; clean only with pH-neutral stone soap — never acids, bleach or abrasive pads. Use pure white cement for light stones to prevent yellowing. Sealed properly, Sunny Grey performs well for decades in family homes, and its grey tone hides dust and stains better than white marble. For stain, etch and yellowing fixes, see the stone care and etch fixes guide.
Related reading: Sunny Grey marble grades and export rates, the live Pakistan marble price list, marble prices in Karachi, marble prices in Lahore, marble prices in Rawalpindi and Islamabad, marble tiles price in Pakistan, white marble price in Pakistan, black marble price in Pakistan, onyx marble price in Pakistan, and marble polishing rates and process.
Answers to guide your budgeting and material selection: