Market Rates Tavera Marble (Lahore/Rawalpindi): PKR 240 - 290/sq.ft
Tavera (Karachi Manghopir): PKR 230 - 270/sq.ft
Ziarat White Super: PKR 520 - 680/sq.ft
Sunny Grey Commercial: PKR 130 - 170/sq.ft
Sunny White Calibrated: PKR 175 - 235/sq.ft
Badal Standard: PKR 145 - 180/sq.ft
Verona Cream: PKR 210 - 260/sq.ft
Export FOB Tavera Export Slabs (First Choice): $17.50 - $24.00/mยฒ
Market Rates Tavera Marble (Lahore/Rawalpindi): PKR 240 - 290/sq.ft
Tavera (Karachi Manghopir): PKR 230 - 270/sq.ft
๐Ÿ“‹ Price Guide ยท Checked 17 November 2026 ยท Material-Only Rates Unless Stated

Badal Marble Price in Pakistan (2026): Grade, City and Finished Rates per Sq.Ft

Badal marble in Pakistan costs PKR 55 to PKR 110 per sq.ft by grade, material only, ex-factory Karachi, at rates checked on 17 November 2026. Prime Black (Grade A) is PKR 90 to PKR 110, Standard (Grade B) is PKR 70 to PKR 80, and Commercial (Grade C) is PKR 55 to PKR 70. Stair treads run PKR 240 to PKR 255 per step, 30mm kitchen slabs run PKR 340 to PKR 360 per sq.ft, and border patti runs PKR 165 to PKR 195 per sq.ft. City rates, the wholesale price index, and finished fitted costs are all listed below, with the scope of each figure stated.

Flooring Tiles (Material)PKR 55 – 110 / sq.ft
Stair TreadsPKR 240 – 255 / step
Kitchen Slabs (30mm)PKR 340 – 360 / sq.ft
Price BasisMaterial-only · 17 Nov 2026
Badal marble polished slab showing charcoal-black base with white cloud veining

Figure 1: Polished gangsaw slab — Grade A Black Badal. This is a real Badal slab photograph from the live Badal variety page, verified on the server — not a render and not another stone’s slab.

Badal Marble Prices by Grade

The table below gives the grade-wise flooring rates from the live Badal marble variety page, checked 17 November 2026. The page states “Prices updated October 2026” and that prices are per square foot, ex-factory Karachi. Final price depends on slab selection — no two slabs are identical — so treat each range as a market range for that grade, not a fixed price for every slab.

GradeDescriptionPKR / sq ftSuits
A — Prime BlackDeep black ground, bold white clouds, calibratedPKR 90 - 110Drawing rooms, stairs, feature walls
B — StandardCharcoal grey, moderate veiningPKR 70 - 80Standard flooring, bedrooms
C — CommercialGrey tones, rustic variationPKR 55 - 70Budget projects, covered outdoor areas

Source basis: Badal variety page, “Prices updated October 2026”, per square foot, ex-factory Karachi, standard flooring grades. Sizes run 12"x12" (16mm), 12"x24" (18mm) and 24"x24" (18mm) tiles, with gangsaw slabs 6–8 ft and border patti 3"–6"; thickness is 16–18mm for tiles, 20mm for gangsaw slabs and 25mm for stair treads; finishes are Polished, Honed and Brushed. Badal is quarried in the Khuzdar and Lasbela ranges of Balochistan and select deposits in Khyber Pakhtunkhwa, and is named after the Urdu word for “clouds”.

Read the rates carefully — the same stone shows different figures on different live Tavera pages, because the scope is different. The variety page’s own lower FAQ block lists higher figures by tile size — 12"x12" commercial tiles at PKR 120–150, 12"x24" flooring tiles at PKR 145–180, and premium 24"x24" Black Badal tiles and gangsaw slabs at PKR 185–250 — and its stair FAQ quotes PKR 300–410 per running foot, against the application table’s PKR 240–255 per step. The live Pakistan marble price list (rates live 30 September 2026) lists Badal higher still as a wholesale index — 12"x12" tiles at PKR 130–150, calibrated 12"x24" (18mm) at PKR 155–185, gangsaw slabs at PKR 190–235 and staircase steps at PKR 290–360 per running foot — with sourcing listed as “KP and Tribal Strata”. The homepage market-rates ticker lists “Badal Standard” at PKR 145–180, and the variety page’s own Product schema lists an offer range of PKR 130–235. None of these figures is wrong on its own; they cover different points in the supply chain (quarry-direct factory gate, wholesale index, market ticker, and a size-based retail table). This guide leads with the variety page’s grade table because it is the most recent (October 2026) and the most specific to Badal, and shows the other live figures separately below instead of blending them into one range. Note the same split on origin: the variety page puts Badal in Khuzdar and Lasbela, Balochistan, plus Nowshera in KP, while the price list attributes Badal to “KP and Tribal Strata” — both are quoted here with their source, and the guide leads with the variety page.

Badal Marble Prices by City

The Badal variety page publishes no city-wise table, so the city figures below come from the live city pages, checked 17 November 2026. Each city page lists Badal as a 12"x24" (15mm) wholesale table row — a different format and scope from the variety page’s grade table — so the two are shown separately and not mixed into the grade table above.

CityPKR / sq ftFormat on the city page
Karachi (factory gate)PKR 90 - 125Badal (Striped Grey), 12"x24" (15mm)
LahorePKR 95 - 135Badal (Grey-White Striped), 12"x24" (15mm)
Islamabad / RawalpindiPKR 95 - 130Badal Grey, 12"x24" (15mm)

The city pages’ own FAQ ranges sit a little higher than their tables: the Karachi city page FAQ puts Badal and Sunny Grey at PKR 90–130 per sq.ft, the Lahore city page FAQ puts entry-level Badal and Sunny Grey at PKR 95–140, and the Rawalpindi and Islamabad page FAQ puts Sunny Grey and Badal at PKR 100–140. Karachi is the factory gate, next to the Manghopir processing mills; other cities add freight — the live price list puts inter-provincial freight at about PKR 10 to PKR 20 per sq.ft for Lahore and Rawalpindi, which explains most of the gap between the Karachi table and the up-country tables. No Peshawar or Multan Badal figure is published on any live page, so none is stated here. The variety page states dispatch from the Karachi and Rawalpindi stockyards within 48–72 hours for standard tile sizes, with custom slabs and stair sets taking 5–7 working days, and delivery nationwide with freight charged at actual cost. Get the rate for your city, grade, size and thickness in writing before ordering.

For export buyers, the variety page lists Badal FOB Karachi price as on request — share quantity and destination port for today’s export rate. Minimum order is one 20ft container (about 4,800–5,200 sq ft of 18mm tiles), lead time is 15–20 days from order confirmation, packaging is ISPM-15 fumigated wooden crates with A-frame slab containers, and payment is T/T or L/C. The domestic minimum order is 400 square feet.

What Drives the Price of Badal Marble?

Grade comes first: Prime Black (PKR 90–110) costs more than Standard (PKR 70–80) and Commercial (PKR 55–70) because it has a deep black ground with bold, clean white clouds, while Commercial grade carries grey tones and rustic variation. Cloud contrast comes second: Badal is named after the Urdu word for “clouds”, and slabs with bold, high-contrast white calcite plumes cost more than slabs with faint or muddy veining. Slab variation comes third: no two slabs are identical — even colour and veining across a lot costs more than mixed tone. Format comes fourth: 30mm kitchen slabs run PKR 340–360 per sq.ft and border patti runs PKR 165–195 per sq.ft, roughly 4–5x and 2x the flooring rate, because of thickness, cutting and edge fabrication, while stair treads run PKR 240–255 per step. Finish comes fifth: mirror polish, honed and brushed finishes differ in labour, and gangsaw slabs cost more than calibrated tiles. Transport is the extra factor for buyers outside Karachi: Lahore and Rawalpindi add roughly PKR 10 to PKR 20 per sq.ft in freight, and delivery is charged at actual cost. Volume is the last lever: the price list notes volume discounts of 5% to 12% on orders over 2,500 sq.ft.

Badal by Application: Where It Works

Badal is the dark workhorse of Pakistani residential construction — the variety page describes it as Pakistan’s most economical dark marble, and calls it one of the country’s most popular budget flooring marbles. Its signature role is contrast: dark floors, bold border patti and staircases, usually paired with a lighter stone. The table below follows the live variety page’s application guidance, with rates checked 17 November 2026.

ApplicationFormatRate
Flooring12"x12" / 12"x24" tiles, 16–18mmPKR 70 - 80 / sq.ft
Stairs25mm single-piece treads, bullnose edgePKR 240 - 255 / step
Border patti3"–6" cut-to-size stripsPKR 165 - 195 / sq.ft
Kitchen countertops30mm slab, fabricated, sealedPKR 340 - 360 / sq.ft
BathroomSealed tiles, honed finish for slip resistancePKR 70 - 80 / sq.ft (material)
Covered outdoor areasGrade C tiles, honed finishPKR 55 - 70 / sq.ft
Feature wallsBook-matched panelsPriced per project
Badal marble installed as living room flooring with border patti in Pakistani home

Figure 2: Badal flooring with border patti in a Pakistani home — the variety page’s own floor photograph.

Flooring is the signature use: Grade B tiles at PKR 70–80 per sq.ft give 5-marla to 1-kanal homes a dark, dramatic floor at a budget rate, and the dark colour hides dust and scuffs better than light stone. As a border, the variety page calls Badal Pakistan’s favourite framing stone — a 3"–6" patti around Sunny Grey or Ziarat White floors creates the classic monochrome Pakistani floor. For stairs, dark treads hide scuffs and look premium — see the staircase steps and risers guide. In kitchens, seal against acids and always use cutting boards — see the kitchen marble guide. In bathrooms the dark palette suits vanities and feature walls, but use a honed finish for slip resistance. Outdoors, keep Badal to covered verandas and car porches: dark stone absorbs solar heat, so avoid direct-sun terraces. The variety page’s recent project shows the combination at full scale: a 1-kanal residence in DHA Phase 6, Lahore — 4,200 sq ft of Grade A Black Badal flooring with Sunny Grey borders, crystallisation polish, finished in 12 working days including stairs.

Material Price Compared With Finished Cost

A material-only rate is only part of a flooring budget. The live price list breaks the finished cost into four parts: raw stone material, white cement and bonding sand at PKR 25 to PKR 35 per sq.ft, stonemason fitting labour at PKR 40 to PKR 50 per sq.ft for a straight layout (PKR 55 to PKR 70 for diagonal patterns), and machine diamond grinding and chemical polish at PKR 30 to PKR 40 per sq.ft. Together, fitting and polishing add roughly PKR 95 to PKR 155 per sq.ft to a material-only quote. On that basis, a Standard grade (Grade B) Badal floor at PKR 70 to PKR 80 per sq.ft material finishes at roughly PKR 165 to PKR 235 per sq.ft for a straight layout, before transport, wastage and sealing. For a 100 sq.ft room, that is a PKR 7,000 to PKR 8,000 material bill and a roughly PKR 16,500 to PKR 23,500 finished floor. The price list’s own finished totals are approximately PKR 220 to PKR 275 per sq.ft for Sunny Grey / Badal — higher than the figure worked out above, because the list starts from its own wholesale-index material rates (PKR 130–185) rather than the variety page’s factory-gate rates — so the PKR 165–235 figure above is labelled as an estimate worked from the variety page’s material rate plus the list’s published components. Get the finished figure in writing: a material-only quote that looks cheap can still end expensive once fitting, polish and sealing are added.

Badal vs Sunny Grey vs Flower Marble — Quick Comparison

Buyers most often compare these three budget stones. Quick verdict: choose Badal for dark contrast, borders and stairs; Sunny Grey for light, airy full-room floors; Flower for the cheapest decorative option. The comparison below follows the live Badal variety page, with price ranges from the live price sources named.

FeatureBadal MarbleSunny Grey MarbleFlower Marble
Floor Price (PKR/sq ft)70 - 8065 - 7560 - 65
ColorCharcoal blackAsh greyReddish pink
VeiningBold white cloudsSubtle, minimalFloral patterns
Best ForBorders, contrast, stairsFull-room flooringDecorative accents
VerdictChoose Badal for dark contrast and bordersChoose Sunny Grey for light, airy floorsChoose Flower for cheapest option

Two figures in that table need a note. The Badal page’s comparison puts Sunny Grey at PKR 65–75 per sq.ft, while the dedicated Sunny Grey price guide (checked 15 November 2026) gives Sunny Grey’s grade table as PKR 55–85 per sq.ft, material only, ex-factory Karachi — the same supply-chain scope difference explained above, not a single agreed rate. And the Sunny White variety page puts Badal at PKR 50–100 per sq.ft, against this guide’s lead grade table of PKR 55–110 — again a scope difference, not a single agreed rate. Badal itself comes in two looks the variety page distinguishes: Black Badal (often called Kala Badal), a jet-black to charcoal ground with stark white cloud ribbons for borders and luxury stairs, and Grey Badal, a softer smoke-grey ground with broader, diffused clouds for full-room living floors. For full dark-marble rates, see the black marble price in Pakistan guide.

How to Judge a Badal Slab Before Buying

Check cloud contrast first: look at several slabs from the same lot, not just the display piece, since every slab is unique and cloud patterns shift between slabs — Badal’s value is in bold, clean white clouds on a deep black ground, so a lot with faint or muddy veining is worth less. Look for pinholes, vein breaks and dull patches, and check thickness with a straight edge: calibrated tiles should sit flat without rocking, and stair treads should be single-piece 25mm with a bullnose edge. Ask the seller, in writing, for the grade, size, thickness and finish, and for whether the quoted rate is material-only or fitted — a slab rate compared with a fitted rate is not a comparison at all. Ask for actual slab photos before ordering, and confirm the veining pattern across the lot, since book-matched pairs are priced per project. For kitchens, ask whether the sealer is included in the quote; for stairs, confirm the tread thickness (25mm) and the edge profile (bullnose) in writing. Finally, compare the same grade and format across sellers, and confirm the city rate — Karachi factory-gate, Lahore and Islamabad/Rawalpindi rates differ by PKR 10 to PKR 20 per sq.ft in freight alone.

Care and Limitations, Stated Plainly

Badal is a calcite marble, so it is sensitive to acids: lemon, vinegar and tomato can etch the polish, and no honest seller can promise a marble floor that never stains — though Badal’s low water absorption (0.14% to 0.28%) means it resists most stains well. Apply a penetrating sealer before grouting, and re-seal annually for kitchen use; wipe turmeric, tea and citrus spills promptly; clean only with pH-neutral stone soap — never acids, bleach or abrasive pads. Scratches show as white marks on dark stone: the variety page’s fix is wet diamond grinding up to Grit 3000 followed by an organic colour-enhancing penetrating impregnator, which deepens the dark tones and seals micro-pores. Standard crystallisation polishing every 2–3 years keeps floors looking new. Keep Badal out of direct sun — dark stone absorbs heat and becomes uncomfortably hot — and use a honed (matte) finish in wet areas for slip resistance. The variety page lists its density at 2.69 g/cm3 (ASTM C97), water absorption at 0.14% to 0.28%, and Mohs hardness at 3.5 to 4.0. For stain, etch and yellowing fixes, see the stone care and etch fixes guide.

Related reading: Badal marble grades and export rates, the live Pakistan marble price list, marble prices in Karachi, marble prices in Lahore, marble prices in Rawalpindi and Islamabad, marble tiles price in Pakistan, black marble price in Pakistan, Sunny Grey marble price in Pakistan, Sunny White marble price in Pakistan, and marble polishing rates and process.

Frequently Asked Questions

Answers to guide your budgeting and material selection:

What is the price of Badal marble in Pakistan?+
In 2026, Badal marble costs PKR 55 to PKR 70 per sq ft for Commercial grade, PKR 70 to PKR 80 for Standard grade, and PKR 90 to PKR 110 for Prime Black grade (flooring tiles, material only, ex-factory Karachi), at rates checked 17 November 2026. Stair treads run PKR 240 to PKR 255 per step, 30mm kitchen slabs run PKR 340 to PKR 360 per sq ft, and border patti runs PKR 165 to PKR 195 per sq ft. WhatsApp us for today's exact rate.
What is the Badal marble price in Karachi vs Lahore?+
The live city pages list Badal as 12x24 (15mm) wholesale table rows: Karachi is PKR 90 to PKR 125 per sq ft, Lahore is PKR 95 to PKR 135, and Islamabad/Rawalpindi is PKR 95 to PKR 130, at rates checked 17 November 2026. These are a different format and scope from the variety page's grade table (PKR 55 to PKR 110), so compare the same grade, size and thickness when checking city rates. No Peshawar or Multan Badal figure is published on any live page.
Why do different Tavera Marble pages show different Badal prices?+
The figures cover different points in the supply chain. The variety page lists quarry-direct ex-factory grade rates (PKR 55 to PKR 110 per sq ft, October 2026), but its own lower FAQ block lists higher figures by tile size (12x12 PKR 120 to PKR 150, 12x24 PKR 145 to PKR 180, 24x24 premium PKR 185 to PKR 250) and stairs at PKR 300 to PKR 410 per running foot. The Pakistan marble price list is a wholesale index (Badal 12x12 tiles PKR 130 to PKR 150, September 2026). City pages list wholesale tables by format, and the homepage ticker lists market rates (Badal Standard PKR 145 to PKR 180). The pages also disagree on origin: the variety page says Khuzdar and Lasbela in Balochistan plus Nowshera in KP, while the price list says KP and Tribal Strata. Always confirm the grade, size, thickness, finish and city in writing before ordering, and ask whether the quote is material-only or fitted.
Is Badal marble good for flooring?+
Yes - the variety page calls Badal one of Pakistan's most popular budget flooring marbles. Its density is 2.69 g/cm3 and water absorption is 0.14% to 0.28%, and the dark colour hides dust and scuffs better than light stones. Use 16 to 18mm tiles for residential flooring, 25mm single-piece treads with a bullnose edge for stairs, and keep it to covered outdoor areas - dark stone absorbs heat in direct sun.
Badal vs Sunny Grey marble - which should I choose?+
Both sit in the budget segment. Badal (PKR 70 to PKR 80 per sq ft) is dark charcoal-black with bold white cloud veining; Sunny Grey is light ash-grey with subtle veining. Choose Badal for dark contrast, borders and stairs, and Sunny Grey for light, airy full-room floors - together they make the classic monochrome Pakistani floor. Note the Badal page's comparison puts Sunny Grey at PKR 65 to PKR 75, while the dedicated Sunny Grey price guide gives PKR 55 to PKR 85 by grade - the same supply-chain scope difference explained above.
How much does a finished Badal marble floor cost per sq.ft?+
Finished cost adds cement and sand (PKR 25 to PKR 35), fitting labour (PKR 40 to PKR 50 straight layout), and diamond polish (PKR 30 to PKR 40) - roughly PKR 95 to PKR 155 on top of the material rate. That gives roughly PKR 165 to PKR 235 per sq ft finished for Standard grade flooring in a straight layout, before transport, wastage and sealing. The price list's own finished total for Sunny Grey and Badal is PKR 220 to PKR 275 per sq ft, because it starts from higher wholesale-index material rates - so this figure is an estimate worked from the variety page's material rate plus the list's published components.

Get Factory-Direct Badal Slabs for Your Floor, Stairs or Kitchen

Compare actual slab photos or request an instant cost estimate for your floor, staircase, kitchen counter or border patti. We supply quarry-direct Badal nationwide, with export in 20ft containers from Karachi.

Request Wholesale Quote ๐Ÿ’ฌ Chat on WhatsApp

Prices on this page are material-only rates checked 17 November 2026, unless a finished cost is stated. Confirm your grade, size, thickness and city rate in writing before ordering.