Market Rates Tavera Marble (Lahore/Rawalpindi): PKR 240 - 290/sq.ft
Tavera (Karachi Manghopir): PKR 230 - 270/sq.ft
Ziarat White Super: PKR 520 - 680/sq.ft
Sunny Grey Commercial: PKR 130 - 170/sq.ft
Sunny White Calibrated: PKR 175 - 235/sq.ft
Badal Standard: PKR 145 - 180/sq.ft
Travertine (B+ to A+): PKR 180 - 750/sq.ft
Verona Cream: PKR 210 - 260/sq.ft
Export FOB Tavera Export Slabs (First Choice): $17.50 - $24.00/m²
Market Rates Tavera Marble (Lahore/Rawalpindi): PKR 240 - 290/sq.ft
Tavera (Karachi Manghopir): PKR 230 - 270/sq.ft
📋 Price Guide · Checked 21 November 2026 · Material-Only Rates Unless Stated

Granite Price in Pakistan (2026): Format, City and Finished Rates per Sq.Ft

Granite in Pakistan costs PKR 350 to PKR 750 per sq.ft, wholesale factory-gate, checked 21 November 2026. Standard commercial tiles (12"x24", 16–18mm) are PKR 350 to PKR 550, large-format calibrated tiles (24"x24", 18–20mm) are PKR 550 to PKR 720, and full gangsaw slabs (20–30mm) are PKR 730 to PKR 750. Stair treads cost PKR 788 per step.

Flooring (Material)PKR 350 – 750 / sq.ft
Stair Treads (25mm)PKR 788 / step
Kitchen SlabsNo rate published
Price BasisMaterial-only · 21 Nov 2026
Polished Pakistani Natural Granite Gangsaw Slab in Industrial Processing Mill

Figure 1: Calibrated gangsaw slab of granite photographed in our processing mill, demonstrating uniform thickness, crystalline grain structure, and mirror polish — the granite variety page’s own slab photograph (granite-slab.webp), listed in the site sitemap for the variety page. The variety page’s caption calls this “Grade A” granite, but the page publishes no granite grade table, so this guide makes no grade claim of its own.

Granite Prices by Format and Thickness

The table below gives the format rates from the live Granite in Pakistan variety page, checked 21 November 2026. The page calls the table its “Verified 2026 Granite in Pakistan Price Index” and states the rates are wholesale factory-gate supply rates across major metropolitan processing yards in Pakistan, per square foot except for stair treads, which are priced per step. The same stone spans PKR 350 to PKR 750 per sq.ft — more than double from the cheapest tile to the top gangsaw slab — so always confirm the format and thickness before comparing prices. The variety page states selected boulders and raw quarry blocks are cut in gangsaw mills with multi-blade diamond cutting frames and bridge saws to ±1mm thickness calibration.

FormatSizeThicknessPKR / sq ftBest for
Standard Commercial Tiles12" × 24" (1x2 ft)16–18 mmPKR 350 - 550Budget flooring, rentals, large areas
Large-Format Calibrated Tiles24" × 24" (2x2 ft)18–20 mmPKR 550 - 720Living rooms, halls, commercial floors
Full Gangsaw Slabs (Selected Lot)Custom length × width20–30 mmPKR 730 - 750Kitchen counters, feature walls, book-matching
Single-Piece Stair Treads12" × 48" / 12" × 60"25 mm (bullnosed)PKR 788 / stepStaircases, heavy outdoor steps

Source basis: Granite in Pakistan variety page price table, per square foot (treads per step), wholesale factory-gate at dispatch gates in Karachi and Balochistan, checked 21 November 2026. The variety page gives no exact day for its 2026 rates, so the check date on this guide (21 November 2026) is the date that applies. The page’s own FAQ block gives the same stone in summary form — PKR 350 to PKR 480 for indigenous grey and pink varieties and PKR 520 to PKR 750 for dense black granites and imported calibrated countertop slabs — and its product data gives the same overall span, PKR 350 to PKR 750. The FAQ summary and the table do not line up by format; the differences are set out below. The variety page describes granite as one of Pakistan’s most sought-after natural building materials, an igneous rock formed under extreme subterranean heat, and states it is extracted from established concessions across Mansehra, Baltistan, and Nagarparkar. No quarry documentation is published on the page, so the origin is reported here as the page states it.

PropertyTest MethodValue
OriginQuarry regionMansehra, Baltistan and Nagarparkar concessions (as stated on the variety page; no quarry documentation published)
Rock typeGeologicalIgneous rock (variety page FAQ)
Bulk densityASTM C972.85 g/cm³
Compressive strengthASTM C17014,200 – 18,500 PSI
Water absorptionASTM C970.14% – 0.28% (low porosity)
Flexural strengthASTM C991,850 – 2,400 PSI
Mohs hardnessMohs scale6.5 – 7.0
Standard sizes—12"x24" and 24"x24" tiles; custom gangsaw slabs; 12"x48" and 12"x60" stair treads
Thickness—16–18 mm tiles; 18–20 mm large-format; 20–30 mm slabs; 25 mm stairs

Technical values are the variety page’s own laboratory-tested figures, stated for architects and contractors to use in structural specifications and tender documents. Two of the page’s own figures disagree with each other — the FAQ’s “exceeding 20,000 PSI” and “<0.2%” water absorption against this table’s 14,200–18,500 PSI and 0.14%–0.28% — and both versions are quoted in this guide rather than picked between.

Read the rates carefully — the same stone shows different figures on the live Tavera pages, because the scope is different. First, the variety page’s FAQ caps indigenous grey and pink granite at PKR 480 per sq.ft, but its own price table runs standard commercial tiles to PKR 550 and large-format calibrated tiles to PKR 720 — both ceilings sit above the FAQ’s cap, and the large-format floor of PKR 550 sits above it too. The FAQ’s dense black and imported band of PKR 520 to PKR 750 overlaps the table’s large-format and gangsaw slab ranges, so the two groupings do not line up by format. Second, the page’s steps answer claims compressive strength “exceeding 20,000 PSI”, but the page’s own laboratory table (ASTM C170) lists 14,200 to 18,500 PSI — the table’s ceiling sits 1,500 PSI below the FAQ’s floor. Third, the same answer claims water absorption of “<0.2%”, but the laboratory table lists 0.14% to 0.28% — the top of the table’s range is above 0.2%. Fourth, the live Pakistan marble price list (rates live 30 September 2026) has no granite row at all, so there is no second live source to cross-check any granite figure; every granite rate in this guide comes from the single variety page. Fifth, the variety page’s freight figure (PKR 15 to PKR 25 per sq.ft to Lahore, Rawalpindi and Islamabad) sits above the price list’s FAQ figure of about PKR 10 to PKR 20 per sq.ft for inter-provincial freight — different pages, different dates, so the figures are not the same quote. Sixth, the variety page’s title calls the stone “Granite Marble”, but its own FAQ calls granite an igneous rock — granite is not marble — and its figure caption calls the slab “Grade A” granite while the page publishes no granite grade table at all. Seventh, the page’s title promises kitchen slabs, but its price table publishes no kitchen slab rate. None of these figures is wrong on its own except where the page contradicts itself; they cover different formats, scopes and dates. This guide leads with the price table because it names the format, size and thickness for each rate, and shows the FAQ summary separately instead of blending the two into one range.

A note on photographs. This guide has one photograph: the variety page’s own slab photograph (granite-slab.webp), shown above as Figure 1. No installed-granite floor photograph is published on the variety page, so none is shown here — this guide shows no other stone’s photograph in its place.

Granite Prices by City

The city figures below are worked from the live variety page’s freight note, checked 21 November 2026. The page states its rates are factory-gate at dispatch gates in Karachi and Balochistan, and that direct truckloads to Lahore, Rawalpindi and Islamabad add PKR 15 to PKR 25 per square foot in freight, depending on fuel surcharges. The city figures are therefore arithmetic from that published freight figure, not published city rates, and are labelled as such. The variety page publishes no freight figure for other cities, so no rates for Peshawar, Multan or Quetta are given here.

CityStandard Tiles (PKR / sq ft)Large-Format Tiles (PKR / sq ft)Gangsaw Slabs (PKR / sq ft)Note
Karachi (factory gate)PKR 350 - 550PKR 550 - 720PKR 730 - 750Factory gate, Karachi and Balochistan dispatch.
LahorePKR 365 - 575PKR 565 - 745PKR 745 - 775PKR 15 to PKR 25 freight added (worked figure).
Islamabad / RawalpindiPKR 365 - 575PKR 565 - 745PKR 745 - 775PKR 15 to PKR 25 freight added (worked figure).

Stair treads are PKR 788 per step at the factory gate. No up-country step rate is published: freight is charged per square foot, and a step’s area depends on its size (12"x48" or 12"x60"), so a per-step freight figure cannot be worked from the page. Get the delivered step rate for your city in writing before ordering.

For export buyers, the variety page publishes no granite FOB rate — the export FOB figure on the site’s market ticker (USD 17.50 to USD 24.00 per sq.m) is for Tavera export slabs, not granite. Ask for a granite export quote in writing. Get the rate for your city, format, size and thickness in writing before ordering.

What Drives the Price of Granite?

Format and thickness come first, and the table proves it: the same stone runs from PKR 350 per sq.ft as a standard 16–18mm tile to PKR 730–750 as a 20–30mm gangsaw slab, more than double for the thicker, larger format. Thickness costs more because a slab ties up more raw block, more gangsaw time, and more polishing per square foot, and a single-piece 25mm stair tread at PKR 788 per step is priced as a finished piece, not by the square foot.

Variety and colour come second. The variety page’s own FAQ splits the stone into indigenous grey and pink varieties at PKR 350 to PKR 480 and dense black granites and imported calibrated countertop slabs at PKR 520 to PKR 750. Dark, dense black granite and imported calibrated slabs sit at the top of the range, while local grey and pink granite sit at the bottom — confirm which variety a quote is for before comparing it with another seller’s figure.

Slab selection comes third: the top gangsaw slab rate is for a “Selected Lot”, so hand-picked, even-toned slabs cost more than mixed stock, and a matched lot for a large floor costs more than single slabs. Finish comes fourth: the page lists mirror polish for slabs and flamed or honed finishes for outdoor steps, and the finishes take different labour, but the page publishes no finish-by-finish price, so no finish premium is stated here.

Transport is the extra factor for buyers outside Karachi and Balochistan: Lahore, Rawalpindi and Islamabad run PKR 15 to PKR 25 per sq.ft above the factory-gate rate on the variety page’s own freight note. Volume is the last lever: the live price list notes volume discounts of 5% to 12% on orders over 2,500 sq.ft when ordering matching block batches directly from the processing mill.

Granite by Application: Where It Works

The table below follows the live variety page’s application guidance, with rates checked 21 November 2026.

ApplicationFormatRate
Living room / hall flooring12"x24" or 24"x24" calibrated tiles, 16–20mm, polishedPKR 350 - 750 / sq.ft (material, by format)
StaircasesSingle-piece 25mm treads, half- or full-bullnose edgePKR 788 / step (material, factory gate)
Kitchen countertopsCalibrated slabs, 20–30mmNo rate published — priced per slab
Bathroom / wet areasPolished or honed finishPKR 350 - 750 / sq.ft (material, by format)
Wall cladding / feature wallsBook-matched slab pairs, 20–30mmPriced per project — no rate published
Outdoor commercial stepsFlamed or honed finishPKR 788 / step (material, factory gate)

Flooring is the everyday use: standard 12"x24" tiles at PKR 350–550 per sq.ft cover large areas at a workable cost, and large-format 24"x24" calibrated tiles at PKR 550–720 suit drawing rooms and commercial floors. The stone’s Mohs hardness of 6.5–7.0 and water absorption of only 0.14%–0.28% support the heavy-traffic claim the variety page makes for residential villas and commercial developments.

For stairs, use single-piece 25mm treads with a half- or full-bullnose edge profile; the variety page says this edging provides long-term pedestrian safety and easy mopping. The tread rate is PKR 788 per step at the factory gate, and risers are priced with the tread as a set — confirm in writing whether your quote covers treads only or treads and risers together.

In kitchens, granite is the stone the variety page recommends most strongly: its FAQ says granite resists knife scratches, hot boiling pots, lemon juice, and oil stains far better than calcium carbonate marbles. But the page publishes no kitchen slab rate, even though its title promises kitchen slabs, so a kitchen quote is priced per slab — get the per-slab figure and the thickness in writing, and ask whether a sealer is included, because the page publishes no sealing guidance for granite.

For bathrooms, the variety page lists wall cladding and flooring as applications but publishes no finish guidance for wet areas — ask the seller whether a honed finish suits your bathroom before ordering polished tiles. For feature walls, book-matched slab pairs create symmetrical walls for reception areas and TV consoles; the variety page says to secure dry-cladding brackets to prevent mechanical detachment, and feature walls are priced per project.

For outdoor commercial steps, the variety page’s own answer is specific: use flamed or honed granite, which it says withstands monsoon rain and heavy foot traffic without slipping or weathering. Note the strength contradiction in that same answer — it claims compressive strength above 20,000 PSI while the page’s laboratory table lists 14,200 to 18,500 PSI — so ask for the test figures for your batch in writing before ordering steps.

Material Price Compared With Finished Cost

A material-only rate is only part of a flooring budget. The live price list breaks the finished cost into four parts: raw stone material, white cement and bonding sand at PKR 25 to PKR 35 per sq.ft, stonemason fitting labour at PKR 40 to PKR 50 per sq.ft for a straight layout (PKR 55 to PKR 70 for diagonal patterns), and machine diamond grinding and chemical polish at PKR 30 to PKR 40 per sq.ft. Together, fitting and polishing add roughly PKR 95 to PKR 155 per sq.ft to a material-only quote.

FormatMaterial (PKR / sq ft)Finished, Straight Layout (PKR / sq ft)
Standard commercial tilesPKR 350 - 550PKR 445 - 705
Large-format calibrated tilesPKR 550 - 720PKR 645 - 875
Full gangsaw slabsPKR 730 - 750PKR 825 - 905

On that basis, a standard-tile granite floor at PKR 350 to PKR 550 per sq.ft material finishes at roughly PKR 445 to PKR 705 per sq.ft for a straight layout, a large-format floor finishes at roughly PKR 645 to PKR 875, and a gangsaw slab floor finishes at roughly PKR 825 to PKR 905, all before transport, wastage and sealing. For a 100 sq.ft room, that is a PKR 35,000 to PKR 55,000 material bill and a roughly PKR 44,500 to PKR 70,500 finished floor in standard tiles. These figures are estimates worked from the variety page’s material rates plus the price list’s published components — the price list’s own finished totals (approximately PKR 340 to PKR 475 per sq.ft) cover Tavera Beige and Verona only, and no finished total for granite is published on any live page. Get the finished figure in writing: a material-only quote that looks cheap can still end expensive once fitting, polish and sealing are added.

Granite vs Ziarat White vs Tavera — Quick Comparison

Buyers most often compare these three. Quick verdict: choose granite for kitchens and heavy-use stairs, Ziarat White for bright prestige flooring, and Tavera for warm beige interiors. The comparison below follows the live granite variety page, with the other figures from the live pages named.

FeatureGraniteZiarat WhiteTavera Beige
Price (PKR/sq ft)350 - 75095 - 650240 - 290 (Lahore/Rawalpindi)
Mohs hardness6.5 - 7.03.5 - 4.0Not published on the pages checked
Water absorption0.14% - 0.28%0.14% - 0.18%Not published on the pages checked
Kitchen countertopsResists knife, heat, lemon and oil better than marbleNeeds sealing; calcite sensitive to acidsNot the kitchen pick — see the kitchen marble guide
Best forKitchens, heavy stairs, high-traffic floorsLuxury flooring, mosques, hotelsWarm beige floors, feature walls

Three figures in that table need a note. The granite price is the variety page’s table span; its FAQ summary gives PKR 350–480 for indigenous grey and pink and PKR 520–750 for dense black and imported slabs instead. The Ziarat White price is the variety page’s grade span, checked 20 November 2026 by the Ziarat White marble price in Pakistan guide. The Tavera price is the homepage market index for Lahore/Rawalpindi; the same index lists Tavera in Karachi Manghopir at PKR 230–270. Compressive strength is left out of the table because the two pages publish it in different units — granite in PSI (14,200–18,500) and Ziarat White in kg/cm² (1,180–1,290) — and this guide does not convert test figures. For full white-marble rates, see the white marble price in Pakistan guide, and for Tavera rates, the Tavera marble guide.

How to Judge a Granite Slab Before Buying

Check the colour and variety first: the variety page’s own bands put indigenous grey and pink granite at PKR 350–480 and dense black granite at PKR 520–750, so a slab quoted at the top of the range should be the dark, dense stone it claims to be, not a grey slab at a black-granite price. Look at several slabs from the same lot, not just the display piece, since every slab is unique and granite’s value is in an even, consistent grain.

Check the thickness second: calibrated tiles should sit flat without rocking, and the variety page states its gangsaw cutting holds ±1mm thickness calibration — measure a few pieces with a straight edge rather than trusting the label. Check the edge profile on steps third: stair treads should be single-piece 25mm with a half- or full-bullnose edge, not jointed pieces.

Ask the seller, in writing, for the format, size, thickness and finish, and for whether the quoted rate is material-only or fitted — a slab rate compared with a fitted rate is not a comparison at all. Ask for actual slab photos before ordering, and confirm the veining and grain pattern across the lot. For kitchens, ask for the per-slab price, since no kitchen rate is published, and ask whether a sealer is included in the quote. For stairs, confirm the tread thickness and the edge profile in writing. Finally, compare the same format across sellers, and confirm the city rate — Karachi factory-gate, Lahore and Islamabad/Rawalpindi rates differ by PKR 15 to PKR 25 per sq.ft on the variety page’s own freight note.

Care and Limitations, Stated Plainly

Granite is the hardest stone on this site: the variety page says it resists knife scratches, hot boiling pots, lemon juice, and oil stains far better than calcium carbonate marbles, and its laboratory table lists Mohs hardness of 6.5–7.0 with water absorption of only 0.14%–0.28%. That hardness is why it suits kitchens and heavy stairs, where a softer marble would scratch and etch.

But the variety page publishes no sealing guidance for granite, so this guide states the gap plainly: ask the seller whether your lot — especially lighter grey and pink granites — needs a sealer, and get the answer in writing. No honest seller can promise a surface that never stains. Granite resists stains better than marble; it is not stain-proof by any claim published on the page. If your seller recommends a sealer, follow the sealer maker’s re-seal schedule.

For outdoor steps, use a flamed or honed finish for grip, as the variety page’s own answer recommends, rather than a mirror polish. Granite is an igneous rock, not a calcite marble, so the white-cement yellowing problem of white marble does not apply in the same way — but the page publishes no yellowing claim for granite, so this guide makes none. For stain, etch and yellowing fixes, see the stone care and etch fixes guide.

Related reading: Granite slabs and steps, the live Pakistan marble price list, marble prices in Karachi, marble prices in Lahore, marble prices in Rawalpindi and Islamabad, white marble price in Pakistan, Ziarat White marble price in Pakistan, Tavera marble, black marble price in Pakistan, marble wall cladding and facades, kitchen marble guide, staircase steps and risers guide, and marble polishing rates and process.

Frequently Asked Questions

Answers to guide your budgeting and material selection:

What is the granite price in Pakistan in 2026?+
In 2026, granite in Pakistan costs PKR 350 to PKR 750 per square foot, wholesale factory-gate, checked 21 November 2026. Standard commercial tiles (12"x24", 16-18mm) are PKR 350 to PKR 550, large-format calibrated tiles (24"x24", 18-20mm) are PKR 550 to PKR 720, and full gangsaw slabs (20-30mm, selected lots) are PKR 730 to PKR 750. Single-piece stair treads (25mm, bullnosed) cost PKR 788 per step. The variety page’s own FAQ gives a different summary — PKR 350 to PKR 480 for indigenous grey and pink varieties and PKR 520 to PKR 750 for dense black granites and imported calibrated countertop slabs — which does not line up with its price table; see the next question.
Why does the granite variety page show two different price ranges?+
The page’s FAQ summary and its price table group the stone differently. The FAQ caps indigenous grey and pink granite at PKR 480 per square foot, but the price table’s standard commercial tiles run to PKR 550 and its large-format calibrated tiles run to PKR 720. The FAQ’s dense black and imported band of PKR 520 to PKR 750 overlaps the table’s large-format and gangsaw slab ranges, so the two groupings do not line up by format. This guide leads with the price table because it names the format, size and thickness for each rate, and quotes the FAQ summary separately instead of blending the two into one range.
What is the granite price in Karachi vs Lahore vs Islamabad?+
The variety page’s rates are factory-gate at dispatch gates in Karachi and Balochistan, and it states direct truckloads to Lahore, Rawalpindi and Islamabad add PKR 15 to PKR 25 per square foot in freight. On that basis, standard commercial tiles are PKR 350 to PKR 550 in Karachi and PKR 365 to PKR 575 in Lahore, Rawalpindi and Islamabad; large-format calibrated tiles are PKR 550 to PKR 720 in Karachi and PKR 565 to PKR 745 up-country; and full gangsaw slabs are PKR 730 to PKR 750 in Karachi and PKR 745 to PKR 775 up-country, all checked 21 November 2026. These city figures are arithmetic from the page’s published freight figure, not published city rates. Stair treads are PKR 788 per step at the factory gate; no up-country step rate is published, because freight is charged per square foot and a step’s area depends on its size.
Why is granite preferred over marble for kitchen countertops?+
Granite is an igneous rock formed under extreme subterranean heat, granting it a Mohs hardness of 6 to 7. It resists knife scratches, hot boiling pots, lemon juice, and oil stains far better than calcium carbonate marbles. The variety page’s own laboratory table lists Mohs hardness of 6.5 to 7.0 and water absorption of 0.14% to 0.28%.
Can Pakistani granite be used for heavy outdoor commercial steps?+
Yes. With high compressive strength exceeding 20,000 PSI and low water absorption (<0.2%), flamed or honed Pakistani granite steps withstand torrential monsoon rains and heavy pedestrian traffic without slipping or weathering. Note the contradiction on the same page: its own laboratory table (ASTM C170) lists compressive strength of 14,200 to 18,500 PSI — below 20,000 PSI — and water absorption of 0.14% to 0.28%, whose top end is above 0.2%. Ask the seller for the test figures for your batch in writing before ordering steps.
How much does a finished granite floor cost per sq.ft?+
Finished cost adds white cement and bonding sand (PKR 25 to PKR 35), fitting labour (PKR 40 to PKR 50 for a straight layout), and machine diamond grinding and chemical polish (PKR 30 to PKR 40) - roughly PKR 95 to PKR 155 on top of the material rate. That gives roughly PKR 445 to PKR 705 per sq ft finished for standard commercial tiles in a straight layout, roughly PKR 645 to PKR 875 for large-format calibrated tiles, and roughly PKR 825 to PKR 905 for full gangsaw slabs, before transport, wastage and sealing. These figures are estimates worked from the variety page’s material rates plus the live price list’s published components - the price list’s own finished totals (PKR 340 to PKR 475) cover Tavera Beige and Verona only, and no finished total for granite is published on any live page.

Get Factory-Direct Granite Slabs for Your Kitchen, Staircase or Floor

Compare actual slab photos or request an instant cost estimate for your kitchen counter, staircase, floor or commercial steps. We supply quarry-direct granite nationwide, with container dispatch from Karachi.

Request Wholesale Quote 💬 Chat on WhatsApp

Prices on this page are material-only rates checked 21 November 2026, unless a finished cost is stated. Confirm your format, size, finish, thickness and city rate in writing before ordering.